Our Range of Gates

We make a full range in our own workshop. Various stock sizes are available or if required, we can make them to your size. We also offer a large selection of gate hinges & fittings in stock. Fence panels are also available to match.

All our timber comes from sustainable/managed sources and is fully pressure treated tanalised ensuring maximum anticipated service life. We also stock a large range of posts and gate fittings from hinges, catches, bolts and springs to the Postcrete to set your gate posts in! When measuring for the width of your gates, don't forget to allow for the fittings! All natural timber products which are exposed to the elements (sun, wind, rain etc) may experience visible signs of "checking/splits". This will not detract from the life expectancy. Tavistock Woodland Sawmill cannot accept responsibility for blemishes caused by weather conditions or carriage/storage of goods.

Once you have bought your driveway gate (which we can make to your size as we manufacture them here on site), Tavistock Woodland Sawmill carries all the hinges and catches you will need to hang and secure it. Cranked bands, double strap band, T-Hinges, backflap hinges, autocatches, tower bolts, brenton bolts, figure 4 catches, ring latches, drop bolts and gate springs are always in stock. For securing your gate posts we have Postcrete.

N.B. Height should be measured from top to bottom of the end styles. When measuring widths allow for the hinges. Most design of gates can be made to the customers required size. Telephone for assistance if needed.

View our wide range of Gates in our Indoor Showroom

Brooke Gate
This gate is made with mortice and tenon joints and braced diagonally behind the tongue and groove cladding at the bottom. The top has planed Ex 75mm x 25mm pales. Sizes include 1.2m (4') H x 1.8m (6') W and 1.8m (6') H x 900mm (3') W

Wall Gate Swept Top
A very heavy duty gate made completely from Ex 88mm x 38mm planed and chamfered Redwood for the uprights, ledges and braces. These gates can be made with a convex (bow) top, a concave (dipped bow) top or a flat top. If a pair of these are to be used, we can do a bow top or concave across the pair. Also available is a swept bow across a pair of Wall Gates. Various sizes are available, style of top must be specified with order.

Mayfair Timber Gate
Although these are usually sold as pairs due to the sloping top rails (these can be hung so they rise or dip in the middle), they can also be manufactured with a level top if desired. A more bespoke design with heavy end styles (Ex 125mm x 75mm), tongue & grove cladding to the bottom and hand cut shaped spindles to the top. With the reducing height to the closing edge, the Mayfair makes an impressive front entrance.

Mayfair Straight Top Gate
Attractive driveways gates with vertical tongue and groove and 'bone' shaped pales at the top. Diagonal braces behind the T&G with mortice and tenon joints.

Roman Timber Gate
As the name implies the style has a Roman numeral look. Planed & chamfered Redwood is used to make it. There are two Roman style of gates and this one has uprights to the lower part with gaps between and the X's incorporated into the top part. This is a heavy duty garden gate and is available in various sizes.

Roman Tongue and Groove Gate
The same as the Roman I but with a solid tongue & groove lower part giving privacy. All timber used is pressure treateda and tanalised.

Ottoman Timber Gate
Fence panels available to match. One of our most popular designs, built on site using planed & chamfered Tanalised Redwood. The Ottoman has heavy duty end styles, tongue & groove lower three quarters (approx, depending on size ordered) with an attractive small hole diamond trellis to the top quarter (approx).

Bosphorus Timber Gate
Another of our range of stylish garden gates that has matching fence panels to go with it. The main theme of this gate is the small hole diamond trellis with a heavy duty planed & chamfered Redwood frame around it with the top and bottom rails morticed into large end styles. All the timber is planed and pressure treated. These gates are available in various sizes as well.

Chelsea Timber Gate
A stylish driveway or entrance gate made from heavy duty planed Tanalised Redwood sourced from sustainable woodlands. Both end styles are Ex 125mm x 75mm making it very sturdy. The pales give an attractive appearance to a five bar gate keeping small pets in (or out!) without blocking the view. Various sizes are available as they made to order by us here in the UK.

Light Paling Timber Gate
Manufactured from Ex 75mm x 25mm planed square edged timber throughout, this is a lightweight basic gate at an economical price. It is Tanalised and available in various sizes. Designed mainly for light use, it is still a very sturdy garden gate.

Trafalgar Timber Gate
Timber for this gate is of course pressure treated and sourced from sustainable woodland and available in any sizes. The Trafalgar is an attractive gate with tongue & groove to the lower part, making in a solid gate with trellis on the top part.

Diamond Timber Gate
This is another sawn Tanalised field gate like the Devon, but it has equal height end styles and the braces form a diamond pattern instead of an X like the Devon bracing. Again, we use a 100mm x 75mm for the top rail for the Diamond gates for durability.

Devon Timber Gate
An ever popular five bar gate is made from sawn Tanalised timber and with a heavy 100mm x 75mm top rail is very substantial. Timber is from sustainable sources, local where possible. These are suitable for either field or garden. Standard height to top rail is approx 1.3m and widths up to 4.8m, the Devon notably has a taller hanger with the diagonal brace rising above the top rail into the hanging style.